El concepto Cotton se desarrolla partiendo de la idea de conseguir un programa de asientos que pueda encajar en cualquier proyecto de interiorismo. Consigue ser la pieza protagonista debido a su estética, comodidad y
proporciones. El sistema se basa en una estructura sobre la que se van uniendo lamas tapizadas traseras que junto con los cojines generan la estructura de respaldo y brazos del mismo. Posteriormente se le añaden unos almohadones que le dan el confort final al respaldo. El cojín de asiento da una idea del confort y comodidad que proporciona. La gran generosidad del sistema en cuanto a módulos, permite generar numerosas combinaciones a fin de poder ser adaptado a múltiples espacios y requerimientos.
Estructura: Estructura (base y respaldo) en tubo de acero barnizado poliéster.
Cojines del asiento: Los cojines del asiento están hechos de espuma de poliuretano recubierta de una funda protectora con divisiones internas. Esta está rellena de plumas de pato blancas, plumón y fibra de poliéster.
Cojines del respaldo: Los cojines están hechos de espuma de poliuretano recubierta de una funda protectora con divisiones internas. Esta está rellena de plumas de pato blancas, plumón y fibra de poliéster.
Cojines de respaldo: Estos cojines cuentan con una funda protectora con compartimentos internos y están rellenos de plumas y plumón de pato blanco esterilizado.
Suspensión: Cinta elástica entrelazada
Piezas metálicas: Las patas metálicas son desmontables y se atornillan. Se pueden elegir entre una gran variedad de acabados del catálogo.
Fundas: Las fundas son totalmente desenfundables, excepto cuando estén tapizadas en piel o similar.
Desmontable: Marco, brazos y respaldo se pueden quitar, están atornillados entre sí.
Abba| Composition | 100% PES |
|---|---|
| Weight | 770 gr/lm |
| Width | 138 cm |
| Abrasion Resistance | 100000 |
| Pilling Resistance | 4 |
| Lightfastness | 5 |
| Change Resistance | 5 |
| Assessment of Ignitability | BS 5852 |
Alaska| Composition | 65%PC 35%PL |
|---|---|
| Weight | 900 gr/lm +- 5% |
| Width | 140 cm |
| Abrasion Resistance | 40000 |
| Pilling Resistance | 4 |
| Lightfastness | 4 |
| Change Resistance | 3 |
| Assessment of Ignitability | BS5852-1 |
Arabia| Composition | 100% PES |
|---|---|
| Weight | 445 gr/lm |
| Width | 138 cm |
| Abrasion Resistance | 50000 |
| Pilling Resistance | 5 |
| Lightfastness | 4-5 |
| Change Resistance | 5 |
| Assessment of Ignitability | BS 5852 |
Arce| Composition | 40% CO; 25% PL; 23% VI; 12% LI |
|---|---|
| Weight | 940 g/ml |
| Width | 140 cm |
| Abrasion Resistance | ≥ 30.000 |
| Pilling Resistance | ≥ 4 |
| Lightfastness | ≥ 4/5 |
| Change Resistance | ≥ 4/5 |
| Assessment of Ignitability | BS 5852-1:1979 |
| Composition | 63% CO 37% LI |
|---|---|
| Weight | 380 G/M2 |
| Width | 140 |
| Abrasion Resistance | 32500 |
| Lightfastness | 3/4 |
Boucle| Composition | 57%CO 38%VI 5%PA |
|---|---|
| Weight | 1050 gr/lm |
| Width | 140 cm |
| Abrasion Resistance | 50000 |
| Pilling Resistance | 4 |
| Lightfastness | 4/5 |
| Change Resistance | 3-4 |
Chelsea| Composition | 34%CV 31%CO 15%LI 13%PAN 7%PES |
|---|---|
| Weight | 940 gr/lm |
| Width | 138 cm |
| Abrasion Resistance | 30000 |
| Pilling Resistance | 3/4 |
| Lightfastness | 5/6 |
Cube| Composition | 54%PAN 46%PES |
|---|---|
| Weight | 620 gr |
| Width | 140 cm |
| Abrasion Resistance | 40.000 |
| Pilling Resistance | 3-4 |
| Lightfastness | 4-6 |
| Assessment of Ignitability | BS5852 SOURCE 0 |
Dakar| Composition | 85% PES 15% CO |
|---|---|
| Weight | 530 G/M2 |
| Width | 140 |
| Abrasion Resistance | 100000 |
| Pilling Resistance | 4-5 |
| Lightfastness | 5-6 |
| Change Resistance | 3-4 |
| Assessment of Ignitability | BS 5852 SOURCE O PASS |
Darwin| Composition | 47%PC 19%WO 16%PL 15%CO 3%NY |
|---|---|
| Weight | 900 gr/lm |
| Width | 140 cm |
| Abrasion Resistance | 30000 |
| Pilling Resistance | 3/4 |
| Lightfastness | 4-5 |
Focus| Composition | 51%PES REC 49%PES |
|---|---|
| Weight | 810 gr |
| Width | 138 cm |
| Abrasion Resistance | 40.000 |
| Pilling Resistance | 4 |
| Lightfastness | 6 |
| Assessment of Ignitability | BS585201 |
Fox| Composition | 55%PP 39%PES 6%CO |
|---|---|
| Weight | 536 gr/m2 |
| Width | 140 |
| Abrasion Resistance | 100000 |
| Pilling Resistance | 4-5 |
| Lightfastness | >6 |
| Change Resistance | 4-5 |
| Assessment of Ignitability | BS5852 SOURCE 0 / EN1021 PART 1 / NFPA 260 |
Fresh| Composition | 49% PL; 32% PC; 10% WO; 9% LI |
|---|---|
| Weight | 1200 g/ml |
| Width | 140 cm |
| Abrasion Resistance | ≥ 100.000 |
| Pilling Resistance | ≥ 4 |
| Lightfastness | ≥ 4/5 |
| Change Resistance | ≥ 4/5 |
| Assessment of Ignitability | BS 5852-1:1979 |
| Composition | 100% LI |
|---|---|
| Weight | 714 G/M2 |
| Width | 140 |
| Abrasion Resistance | 50000 |
Kadif| Composition | 92% PES 5% CO 3% LA |
|---|---|
| Weight | 500 G/ML |
| Width | 140 |
| Abrasion Resistance | 100000 |
| Pilling Resistance | 4-5 |
| Lightfastness | 4 |
Kaoba| Composition | 52% PC; 42% PL; 6% CO |
|---|---|
| Weight | 1.100 g/ml |
| Width | 140 cm |
| Abrasion Resistance | ≥ 80.000 |
| Pilling Resistance | ≥ 4 |
| Lightfastness | ≥ 4/5 |
| Change Resistance | ≥ 4/5 |
| Assessment of Ignitability | BS 5852-1:1979 |
Lynda| Composition | 100% PL |
|---|---|
| Weight | 1200 g/ml |
| Width | 145 cm |
| Lightfastness | ≥ 4/5 |
| Change Resistance | ≥ 4/5 |
| Composition | 40%VI 22%PES 20% CO 18% LI |
|---|---|
| Weight | 410 G/M2 |
| Width | 138 |
| Abrasion Resistance | 28000 |
| Lightfastness | 4-5 |
| Composition | 38%VI 20%CO 18%LI 24%PL |
|---|---|
| Weight | 410 G/M2 |
| Width | 140 |
| Abrasion Resistance | 22000 |
Manhattan| Composition | 26%PL 37%PC 21%CO 16%LI |
|---|---|
| Weight | 890 gr/lm |
| Width | 140 cm |
| Abrasion Resistance | >60000 |
| Pilling Resistance | 4 |
| Lightfastness | 4/5 |
| Change Resistance | 3/4 |
| Composition | 89% PES 11% CO |
|---|---|
| Weight | 654 G/ML |
| Width | 140 |
| Abrasion Resistance | 60000 |
| Pilling Resistance | 5 |
| Lightfastness | 5-6 |
| Change Resistance | 4 |
| Assessment of Ignitability | EN 1021-1:2006 CIGARRO |
| Composition | 100% PES / RESPALDO 96% PES 4% NY |
|---|---|
| Weight | 574 G/ML |
| Width | 138 |
| Abrasion Resistance | 45000 |
| Pilling Resistance | 4-5 |
| Lightfastness | 4-5 |
| Change Resistance | 5 |
| Assessment of Ignitability | BS 5852 CIGARRO |
Nido| Composition | 58% PC; 30% WO; 12% PL |
|---|---|
| Weight | 1180 g/ml |
| Width | 140 cm |
| Abrasion Resistance | ≥ 100.000 |
| Pilling Resistance | ≥ 4 |
| Lightfastness | ≥ 4/5 |
| Change Resistance | ≥ 4/5 |
| Assessment of Ignitability | BS 5852-1:1979 |
Nyth| Composition | 58%PC 20%WO 18%PL 4%CO |
|---|---|
| Weight | 840/850gr/lm |
| Width | 140 cm |
| Abrasion Resistance | 28000 |
| Pilling Resistance | 3/4 |
| Lightfastness | 4/5 |
Olmo| Composition | 38% PL; 25% VI; 16% LI; 11% PC; 10% WO |
|---|---|
| Weight | 1080 g/ml |
| Width | 140 cm |
| Abrasion Resistance | ≥ 100.000 |
| Pilling Resistance | ≥ 4 |
| Lightfastness | ≥ 4/5 |
| Change Resistance | ≥ 4/5 |
| Assessment of Ignitability | BS 5852-1:1979 |
Oslo| Composition | 100%LI |
|---|---|
| Weight | 759 gr/ml |
| Width | 138 |
| Abrasion Resistance | 35000 |
| Pilling Resistance | 3-4 |
| Lightfastness | 5 |
| Change Resistance | 4-5 |
| Assessment of Ignitability | BS5852 PART 1 (1979) |
Oxid| Composition | 100% LI |
|---|---|
| Weight | 700 gr/m2 |
| Width | 133 |
| Abrasion Resistance | 25000 |
| Assessment of Ignitability | BS5852 SOURCE 0 / EN1021 PART 1 / NFPA 260 |
Radon| Composition | 64%PAN 17%PES 15%CV 4%LI |
|---|---|
| Weight | 731 gr |
| Width | 138 cm |
| Abrasion Resistance | 20.000 |
| Pilling Resistance | 4 |
| Lightfastness | 6 |
| Assessment of Ignitability | BS58520 |
Random| Composition | 28%PC 27%CO 21%VI 14%WO 7%PL 3%PC |
|---|---|
| Weight | 1130gr/lm |
| Width | 140 cm |
| Abrasion Resistance | 30000 |
| Pilling Resistance | 4 |
| Lightfastness | 4/5 |
| UV Resistance | 4 |
| Change Resistance | 3/4 |
| Assessment of Ignitability | BS5852 CIGARETTE TEST PASS, BS5852 MATCH TEST, CAL TB117 |
Riccio| Composition | 96% PES 4%PAC |
|---|---|
| Weight | 680 gr/lm |
| Width | 140 cm |
| Abrasion Resistance | 70000 |
| Pilling Resistance | 4 |
| Lightfastness | 5 |
| Change Resistance | 5 |
| Assessment of Ignitability | BS 5852 |
Riedel| Composition | 49%PL 39%CO 12%VI |
|---|---|
| Weight | 860 gr/lm |
| Width | 140 cm |
| Abrasion Resistance | 20000 |
| Pilling Resistance | 4 |
| Lightfastness | 4/5 |
| Change Resistance | 3/4 |
Sabbia| Composition | 100%PES |
|---|---|
| Weight | 630 gr/mL |
| Width | 138 |
| Abrasion Resistance | 70000 |
| Pilling Resistance | 5 |
| Lightfastness | 4 |
| Change Resistance | 4-5 |
| Assessment of Ignitability | BS5852 PART 1 (1979) |
Sahara| Composition | 58% PES 50 %CO |
|---|---|
| Weight | 600 G/ML |
| Width | 138 |
| Abrasion Resistance | 70000 |
| Pilling Resistance | 4-5 |
| Lightfastness | 5 |
| Change Resistance | 3-4 |
| Assessment of Ignitability | BS5852 (1979) |
Sayon| Composition | 68%PES 24%PP 8%CO |
|---|---|
| Weight | 480 gr/m2 |
| Width | 140 |
| Abrasion Resistance | 70000 |
| Pilling Resistance | 4-5 |
| Lightfastness | >6 |
| Change Resistance | 4-5 |
| Assessment of Ignitability | BS5852 SOURCE 0 / EN1021-PART 1 / CAL TB 117 /NFPA 60 |
Scott| Composition | 50%PAN 45%PES 5%CV |
|---|---|
| Weight | 594 gr |
| Width | 140 cm |
| Abrasion Resistance | 90.000 |
| Pilling Resistance | 4-5 |
| Lightfastness | 4-5 |
| Assessment of Ignitability | BS58520 - CAL117-1 |
Sean| Composition | 55%VI 29%CO 16%LI |
|---|---|
| Weight | 578 gr/m2 |
| Width | 141 |
| Abrasion Resistance | 30000 |
| Assessment of Ignitability | BS5852 PART 1 IGN 0 CIGARETTE / EN1021 PART 1 UPHOLSTERY |
| Composition | 55%PES 20%CU 15%CO 10%LI |
|---|---|
| Weight | 530 G/M2 |
| Width | 138 |
| Abrasion Resistance | 35000 |
| Pilling Resistance | 4-5 |
| Lightfastness | 5-6 |
| Change Resistance | 3-4 |
| Assessment of Ignitability | BS 5852 SOURCE O PASS |
Senna| Composition | 7%VIS 22%P.P. 22%PAC 49%POL |
|---|---|
| Weight | 530 gr/m2 |
| Width | 140 |
| Abrasion Resistance | >50000 |
| Pilling Resistance | 4 |
| Lightfastness | 4 |
| Change Resistance | 4-5 |
Soho| Composition | 34%CV 31%CO 15%LI 13%PAN |
|---|---|
| Weight | gr/lm |
| Width | 140 cm |
| Abrasion Resistance | 25000 |
| Lightfastness | 5/6 |
Trace| Composition | 53%VI 17%LI 16%CO 9%PO 5%WO |
|---|---|
| Weight | 580 gr/m2 |
| Width | 138 |
| Abrasion Resistance | 70000 |
| Assessment of Ignitability | BS5852 PART 1 / EN1021 PART 1 / NFPA 260 |
Trek| Composition | 82%PES 18%PAN |
|---|---|
| Weight | 910 gr |
| Width | 138 cm |
| Abrasion Resistance | 30.000 |
| Pilling Resistance | 4 |
| Lightfastness | 5 |
| Assessment of Ignitability | BS58520 |
Tropic| Composition | 55% PC; 31% WO; 14% PL |
|---|---|
| Weight | 1010 g/ml |
| Width | 140 cm |
| Abrasion Resistance | 100000 |
| Pilling Resistance | ≥ 4 |
| Lightfastness | ≥ 4/5 |
| Change Resistance | ≥ 4/5 |
| Assessment of Ignitability | BS 5852-1:1979 |
Turner| Composition | 45%PP 24%PES 22%PES REC 5%CO REC 4% |
|---|---|
| Weight | 715 gr/lm |
| Width | 140 cm |
| Abrasion Resistance | 45000 |
| Pilling Resistance | 4-5 |
| Lightfastness | >6 |
| Change Resistance | 4 |
| Assessment of Ignitability | BS5852 Source 0 EN1021-Part 1:2006 CAL TB 117:2013 NFPA 260:2013 |
Vogue| Composition | 50%PC 23%LI 19%CO 8%NY |
|---|---|
| Weight | 990 gr/lm |
| Width | 140 cm |
| Abrasion Resistance | 40000 |
| Pilling Resistance | 4 |
| Lightfastness | 4/5 |
| Assessment of Ignitability | BS 5852 |
Winter| Composition | 61%PC 18%CO 7%JU 6%PL 4%NY 4%VI |
|---|---|
| Weight | 950gr/lm |
| Width | 140 cm |
| Abrasion Resistance | 30000 |
| Pilling Resistance | 3/4 |
| Lightfastness | 4/5 |
| Change Resistance | 4 |
| Assessment of Ignitability | BS5852 CIGARETTE TEST, BS5852 MATCH TEST, CALL TB 117 |
Alfil| Composition | 100% PL |
|---|---|
| Weight | 550 gr/lm |
| Width | 140 cm |
| Abrasion Resistance | 100000 |
| Lightfastness | 4 |
| Assessment of Ignitability | UNE1021 PARTS 1-2 / BS5852 CIGARETTE & MATCH |
| Composition | 100% PU/PC -SOPORTE 100% MICROFIBRA COAGULADA POLIAMIDICA |
|---|---|
| Weight | 390 G/M2 |
| Width | 140 ± 2% |
| Abrasion Resistance | >200000 |
| Lightfastness | 4 |
| Assessment of Ignitability | UNE 1021 P 1-2 - BS 5852 CIGARRO |
| Thickness | 1,4 / 1,6 mm |
|---|---|
| Origin | European Raw Hides |
| Dry Rub Fastness | EN ISO 11640 / 1000 CYCLES VAL.4 GREY SCALE |
| Wet Rub Fastness | EN ISO 11640 / 250 CYCLES VAL.4 GREY SCALE |
| Light Fastness | EN ISO 105-B02 / >6 BLUE SCALE |
| Adhesion of Finishing | EN ISO 11644 / >2 N / 10 mm |
| Tear Resistence | EN ISO 3377-1 / >20 N |
| Crack Resistence | EN ISO 5402 / 50000 CYCLES NO DAMAGE |
| Thickness | 1,3 / 1,5 mm |
|---|---|
| Origin | European Raw Hides |
| Dry Rub Fastness | EN ISO 11640 / 1000 CYCLES VAL.4 GREY SCALE |
| Wet Rub Fastness | EN ISO 11640 / 250 CYCLES VAL.4 GREY SCALE |
| Light Fastness | EN ISO 105-B02 / >6 BLUE SCALE |
| Adhesion of Finishing | EN ISO 11644 / >2 N / 10 mm |
| Tear Resistence | EN ISO 3377-1 / >20 N |
| Crack Resistence | EN ISO 5402 / 50000 CYCLES NO DAMAGE |
| Thickness | 1,2 / 1,4 mm |
|---|---|
| Origin | European Raw Hides |
| Dry Rub Fastness | EN ISO 11640 / 1000 CYCLES VAL.5 GREY SCALE |
| Wet Rub Fastness | EN ISO 11640 / 250 CYCLES VAL.5 GREY SCALE |
| Light Fastness | EN ISO 105-B02 / >6 BLUE SCALE |
| Adhesion of Finishing | EN ISO 11644 / >2 N / 10 mm |
| Tear Resistence | EN ISO 3377-1 / >20 N |
| Crack Resistence | EN ISO 5402 / 20000 CYCLES NO DAMAGE |
Bronce
Cobre