El sistema de asientos Heaven se concibe como un producto puramente aéreo y lineal que flota en el ambiente en que se ubica. El sistema se basa en una estructura sobre la que se van uniendo lamas tapizadas traseras que junto con los cojines generan la estructura de respaldo y brazos del mismo. Posteriormente se le añaden unos almohadones que le dan el confort final al respaldo. El cojín de asiento en una única pieza permite sentarse en cualquier parte del mismo con el máximo aprovechamiento. El programa permite acomodarse de distintas maneras según el momento. La gran generosidad del sistema en cuanto a módulos, permite generar numerosas combinaciones a fin de poder ser adaptado a múltiples espacios y requerimientos
Estructura: Estructura (base y respaldo) en tubo de acero barnizado poliéster.
Cojines del asiento: Los cojines del asiento están hechos de espuma de poliuretano recubierta de una funda protectora con divisiones internas. Esta está rellena de plumas de pato blancas, plumón y fibra de poliéster.
Cojines del respaldo: Los cojines están hechos de espuma de poliuretano recubierta de una funda protectora con divisiones internas. Esta está rellena de plumas de pato blancas, plumón y fibra de poliéster.
Cojines de respaldo: Estos cojines cuentan con una funda protectora con compartimentos internos y están rellenos de plumas y plumón de pato blanco esterilizado.
Suspensión: Cinta elástica entrelazada
Piezas metálicas: Las patas metálicas son desmontables y se atornillan. Se pueden elegir entre una gran variedad de acabados del catálogo.
Fundas: Las fundas son totalmente desenfundables, excepto cuando estén tapizadas en piel o similar.
Desmontable: Marco, brazos y respaldo se pueden quitar, están atornillados entre sí.
Abba| Composition | 100% PES |
|---|---|
| Weight | 770 gr/lm |
| Width | 138 cm |
| Abrasion Resistance | 100000 |
| Pilling Resistance | 4 |
| Lightfastness | 5 |
| Change Resistance | 5 |
| Assessment of Ignitability | BS 5852 |
Alaska| Composition | 65%PC 35%PL |
|---|---|
| Weight | 900 gr/lm +- 5% |
| Width | 140 cm |
| Abrasion Resistance | 40000 |
| Pilling Resistance | 4 |
| Lightfastness | 4 |
| Change Resistance | 3 |
| Assessment of Ignitability | BS5852-1 |
Arabia| Composition | 100% PES |
|---|---|
| Weight | 445 gr/lm |
| Width | 138 cm |
| Abrasion Resistance | 50000 |
| Pilling Resistance | 5 |
| Lightfastness | 4-5 |
| Change Resistance | 5 |
| Assessment of Ignitability | BS 5852 |
Arce| Composition | 40% CO; 25% PL; 23% VI; 12% LI |
|---|---|
| Weight | 940 g/ml |
| Width | 140 cm |
| Abrasion Resistance | ≥ 30.000 |
| Pilling Resistance | ≥ 4 |
| Lightfastness | ≥ 4/5 |
| Change Resistance | ≥ 4/5 |
| Assessment of Ignitability | BS 5852-1:1979 |
| Composition | 63% CO 37% LI |
|---|---|
| Weight | 380 G/M2 |
| Width | 140 |
| Abrasion Resistance | 32500 |
| Lightfastness | 3/4 |
Boucle| Composition | 57%CO 38%VI 5%PA |
|---|---|
| Weight | 1050 gr/lm |
| Width | 140 cm |
| Abrasion Resistance | 50000 |
| Pilling Resistance | 4 |
| Lightfastness | 4/5 |
| Change Resistance | 3-4 |
Chelsea| Composition | 34%CV 31%CO 15%LI 13%PAN 7%PES |
|---|---|
| Weight | 940 gr/lm |
| Width | 138 cm |
| Abrasion Resistance | 30000 |
| Pilling Resistance | 3/4 |
| Lightfastness | 5/6 |
Cube| Composition | 54%PAN 46%PES |
|---|---|
| Weight | 620 gr |
| Width | 140 cm |
| Abrasion Resistance | 40.000 |
| Pilling Resistance | 3-4 |
| Lightfastness | 4-6 |
| Assessment of Ignitability | BS5852 SOURCE 0 |
Dakar| Composition | 85% PES 15% CO |
|---|---|
| Weight | 530 G/M2 |
| Width | 140 |
| Abrasion Resistance | 100000 |
| Pilling Resistance | 4-5 |
| Lightfastness | 5-6 |
| Change Resistance | 3-4 |
| Assessment of Ignitability | BS 5852 SOURCE O PASS |
Darwin| Composition | 47%PC 19%WO 16%PL 15%CO 3%NY |
|---|---|
| Weight | 900 gr/lm |
| Width | 140 cm |
| Abrasion Resistance | 30000 |
| Pilling Resistance | 3/4 |
| Lightfastness | 4-5 |
Focus| Composition | 51%PES REC 49%PES |
|---|---|
| Weight | 810 gr |
| Width | 138 cm |
| Abrasion Resistance | 40.000 |
| Pilling Resistance | 4 |
| Lightfastness | 6 |
| Assessment of Ignitability | BS585201 |
Fox| Composition | 55%PP 39%PES 6%CO |
|---|---|
| Weight | 536 gr/m2 |
| Width | 140 |
| Abrasion Resistance | 100000 |
| Pilling Resistance | 4-5 |
| Lightfastness | >6 |
| Change Resistance | 4-5 |
| Assessment of Ignitability | BS5852 SOURCE 0 / EN1021 PART 1 / NFPA 260 |
Fresh| Composition | 49% PL; 32% PC; 10% WO; 9% LI |
|---|---|
| Weight | 1200 g/ml |
| Width | 140 cm |
| Abrasion Resistance | ≥ 100.000 |
| Pilling Resistance | ≥ 4 |
| Lightfastness | ≥ 4/5 |
| Change Resistance | ≥ 4/5 |
| Assessment of Ignitability | BS 5852-1:1979 |
| Composition | 100% LI |
|---|---|
| Weight | 714 G/M2 |
| Width | 140 |
| Abrasion Resistance | 50000 |
Kadif| Composition | 92% PES 5% CO 3% LA |
|---|---|
| Weight | 500 G/ML |
| Width | 140 |
| Abrasion Resistance | 100000 |
| Pilling Resistance | 4-5 |
| Lightfastness | 4 |
Kaoba| Composition | 52% PC; 42% PL; 6% CO |
|---|---|
| Weight | 1.100 g/ml |
| Width | 140 cm |
| Abrasion Resistance | ≥ 80.000 |
| Pilling Resistance | ≥ 4 |
| Lightfastness | ≥ 4/5 |
| Change Resistance | ≥ 4/5 |
| Assessment of Ignitability | BS 5852-1:1979 |
Lynda| Composition | 100% PL |
|---|---|
| Weight | 1200 g/ml |
| Width | 145 cm |
| Lightfastness | ≥ 4/5 |
| Change Resistance | ≥ 4/5 |
| Composition | 40%VI 22%PES 20% CO 18% LI |
|---|---|
| Weight | 410 G/M2 |
| Width | 138 |
| Abrasion Resistance | 28000 |
| Lightfastness | 4-5 |
| Composition | 38%VI 20%CO 18%LI 24%PL |
|---|---|
| Weight | 410 G/M2 |
| Width | 140 |
| Abrasion Resistance | 22000 |
Manhattan| Composition | 26%PL 37%PC 21%CO 16%LI |
|---|---|
| Weight | 890 gr/lm |
| Width | 140 cm |
| Abrasion Resistance | >60000 |
| Pilling Resistance | 4 |
| Lightfastness | 4/5 |
| Change Resistance | 3/4 |
| Composition | 89% PES 11% CO |
|---|---|
| Weight | 654 G/ML |
| Width | 140 |
| Abrasion Resistance | 60000 |
| Pilling Resistance | 5 |
| Lightfastness | 5-6 |
| Change Resistance | 4 |
| Assessment of Ignitability | EN 1021-1:2006 CIGARRO |
| Composition | 100% PES / RESPALDO 96% PES 4% NY |
|---|---|
| Weight | 574 G/ML |
| Width | 138 |
| Abrasion Resistance | 45000 |
| Pilling Resistance | 4-5 |
| Lightfastness | 4-5 |
| Change Resistance | 5 |
| Assessment of Ignitability | BS 5852 CIGARRO |
Nido| Composition | 58% PC; 30% WO; 12% PL |
|---|---|
| Weight | 1180 g/ml |
| Width | 140 cm |
| Abrasion Resistance | ≥ 100.000 |
| Pilling Resistance | ≥ 4 |
| Lightfastness | ≥ 4/5 |
| Change Resistance | ≥ 4/5 |
| Assessment of Ignitability | BS 5852-1:1979 |
Nyth| Composition | 58%PC 20%WO 18%PL 4%CO |
|---|---|
| Weight | 840/850gr/lm |
| Width | 140 cm |
| Abrasion Resistance | 28000 |
| Pilling Resistance | 3/4 |
| Lightfastness | 4/5 |
Olmo| Composition | 38% PL; 25% VI; 16% LI; 11% PC; 10% WO |
|---|---|
| Weight | 1080 g/ml |
| Width | 140 cm |
| Abrasion Resistance | ≥ 100.000 |
| Pilling Resistance | ≥ 4 |
| Lightfastness | ≥ 4/5 |
| Change Resistance | ≥ 4/5 |
| Assessment of Ignitability | BS 5852-1:1979 |
Oslo| Composition | 100%LI |
|---|---|
| Weight | 759 gr/ml |
| Width | 138 |
| Abrasion Resistance | 35000 |
| Pilling Resistance | 3-4 |
| Lightfastness | 5 |
| Change Resistance | 4-5 |
| Assessment of Ignitability | BS5852 PART 1 (1979) |
Oxid| Composition | 100% LI |
|---|---|
| Weight | 700 gr/m2 |
| Width | 133 |
| Abrasion Resistance | 25000 |
| Assessment of Ignitability | BS5852 SOURCE 0 / EN1021 PART 1 / NFPA 260 |
Radon| Composition | 64%PAN 17%PES 15%CV 4%LI |
|---|---|
| Weight | 731 gr |
| Width | 138 cm |
| Abrasion Resistance | 20.000 |
| Pilling Resistance | 4 |
| Lightfastness | 6 |
| Assessment of Ignitability | BS58520 |
Random| Composition | 28%PC 27%CO 21%VI 14%WO 7%PL 3%PC |
|---|---|
| Weight | 1130gr/lm |
| Width | 140 cm |
| Abrasion Resistance | 30000 |
| Pilling Resistance | 4 |
| Lightfastness | 4/5 |
| UV Resistance | 4 |
| Change Resistance | 3/4 |
| Assessment of Ignitability | BS5852 CIGARETTE TEST PASS, BS5852 MATCH TEST, CAL TB117 |
Riccio| Composition | 96% PES 4%PAC |
|---|---|
| Weight | 680 gr/lm |
| Width | 140 cm |
| Abrasion Resistance | 70000 |
| Pilling Resistance | 4 |
| Lightfastness | 5 |
| Change Resistance | 5 |
| Assessment of Ignitability | BS 5852 |
Riedel| Composition | 49%PL 39%CO 12%VI |
|---|---|
| Weight | 860 gr/lm |
| Width | 140 cm |
| Abrasion Resistance | 20000 |
| Pilling Resistance | 4 |
| Lightfastness | 4/5 |
| Change Resistance | 3/4 |
Sabbia| Composition | 100%PES |
|---|---|
| Weight | 630 gr/mL |
| Width | 138 |
| Abrasion Resistance | 70000 |
| Pilling Resistance | 5 |
| Lightfastness | 4 |
| Change Resistance | 4-5 |
| Assessment of Ignitability | BS5852 PART 1 (1979) |
Sahara| Composition | 58% PES 50 %CO |
|---|---|
| Weight | 600 G/ML |
| Width | 138 |
| Abrasion Resistance | 70000 |
| Pilling Resistance | 4-5 |
| Lightfastness | 5 |
| Change Resistance | 3-4 |
| Assessment of Ignitability | BS5852 (1979) |
Sayon| Composition | 68%PES 24%PP 8%CO |
|---|---|
| Weight | 480 gr/m2 |
| Width | 140 |
| Abrasion Resistance | 70000 |
| Pilling Resistance | 4-5 |
| Lightfastness | >6 |
| Change Resistance | 4-5 |
| Assessment of Ignitability | BS5852 SOURCE 0 / EN1021-PART 1 / CAL TB 117 /NFPA 60 |
Scott| Composition | 50%PAN 45%PES 5%CV |
|---|---|
| Weight | 594 gr |
| Width | 140 cm |
| Abrasion Resistance | 90.000 |
| Pilling Resistance | 4-5 |
| Lightfastness | 4-5 |
| Assessment of Ignitability | BS58520 - CAL117-1 |
Sean| Composition | 55%VI 29%CO 16%LI |
|---|---|
| Weight | 578 gr/m2 |
| Width | 141 |
| Abrasion Resistance | 30000 |
| Assessment of Ignitability | BS5852 PART 1 IGN 0 CIGARETTE / EN1021 PART 1 UPHOLSTERY |
| Composition | 55%PES 20%CU 15%CO 10%LI |
|---|---|
| Weight | 530 G/M2 |
| Width | 138 |
| Abrasion Resistance | 35000 |
| Pilling Resistance | 4-5 |
| Lightfastness | 5-6 |
| Change Resistance | 3-4 |
| Assessment of Ignitability | BS 5852 SOURCE O PASS |
Senna| Composition | 7%VIS 22%P.P. 22%PAC 49%POL |
|---|---|
| Weight | 530 gr/m2 |
| Width | 140 |
| Abrasion Resistance | >50000 |
| Pilling Resistance | 4 |
| Lightfastness | 4 |
| Change Resistance | 4-5 |
Soho| Composition | 34%CV 31%CO 15%LI 13%PAN |
|---|---|
| Weight | gr/lm |
| Width | 140 cm |
| Abrasion Resistance | 25000 |
| Lightfastness | 5/6 |
Trace| Composition | 53%VI 17%LI 16%CO 9%PO 5%WO |
|---|---|
| Weight | 580 gr/m2 |
| Width | 138 |
| Abrasion Resistance | 70000 |
| Assessment of Ignitability | BS5852 PART 1 / EN1021 PART 1 / NFPA 260 |
Trek| Composition | 82%PES 18%PAN |
|---|---|
| Weight | 910 gr |
| Width | 138 cm |
| Abrasion Resistance | 30.000 |
| Pilling Resistance | 4 |
| Lightfastness | 5 |
| Assessment of Ignitability | BS58520 |
Tropic| Composition | 55% PC; 31% WO; 14% PL |
|---|---|
| Weight | 1010 g/ml |
| Width | 140 cm |
| Abrasion Resistance | 100000 |
| Pilling Resistance | ≥ 4 |
| Lightfastness | ≥ 4/5 |
| Change Resistance | ≥ 4/5 |
| Assessment of Ignitability | BS 5852-1:1979 |
Turner| Composition | 45%PP 24%PES 22%PES REC 5%CO REC 4% |
|---|---|
| Weight | 715 gr/lm |
| Width | 140 cm |
| Abrasion Resistance | 45000 |
| Pilling Resistance | 4-5 |
| Lightfastness | >6 |
| Change Resistance | 4 |
| Assessment of Ignitability | BS5852 Source 0 EN1021-Part 1:2006 CAL TB 117:2013 NFPA 260:2013 |
Vogue| Composition | 50%PC 23%LI 19%CO 8%NY |
|---|---|
| Weight | 990 gr/lm |
| Width | 140 cm |
| Abrasion Resistance | 40000 |
| Pilling Resistance | 4 |
| Lightfastness | 4/5 |
| Assessment of Ignitability | BS 5852 |
Winter| Composition | 61%PC 18%CO 7%JU 6%PL 4%NY 4%VI |
|---|---|
| Weight | 950gr/lm |
| Width | 140 cm |
| Abrasion Resistance | 30000 |
| Pilling Resistance | 3/4 |
| Lightfastness | 4/5 |
| Change Resistance | 4 |
| Assessment of Ignitability | BS5852 CIGARETTE TEST, BS5852 MATCH TEST, CALL TB 117 |
Alfil| Composition | 100% PL |
|---|---|
| Weight | 550 gr/lm |
| Width | 140 cm |
| Abrasion Resistance | 100000 |
| Lightfastness | 4 |
| Assessment of Ignitability | UNE1021 PARTS 1-2 / BS5852 CIGARETTE & MATCH |
| Composition | 100% PU/PC -SOPORTE 100% MICROFIBRA COAGULADA POLIAMIDICA |
|---|---|
| Weight | 390 G/M2 |
| Width | 140 ± 2% |
| Abrasion Resistance | >200000 |
| Lightfastness | 4 |
| Assessment of Ignitability | UNE 1021 P 1-2 - BS 5852 CIGARRO |
| Thickness | 1,4 / 1,6 mm |
|---|---|
| Origin | European Raw Hides |
| Dry Rub Fastness | EN ISO 11640 / 1000 CYCLES VAL.4 GREY SCALE |
| Wet Rub Fastness | EN ISO 11640 / 250 CYCLES VAL.4 GREY SCALE |
| Light Fastness | EN ISO 105-B02 / >6 BLUE SCALE |
| Adhesion of Finishing | EN ISO 11644 / >2 N / 10 mm |
| Tear Resistence | EN ISO 3377-1 / >20 N |
| Crack Resistence | EN ISO 5402 / 50000 CYCLES NO DAMAGE |
| Thickness | 1,3 / 1,5 mm |
|---|---|
| Origin | European Raw Hides |
| Dry Rub Fastness | EN ISO 11640 / 1000 CYCLES VAL.4 GREY SCALE |
| Wet Rub Fastness | EN ISO 11640 / 250 CYCLES VAL.4 GREY SCALE |
| Light Fastness | EN ISO 105-B02 / >6 BLUE SCALE |
| Adhesion of Finishing | EN ISO 11644 / >2 N / 10 mm |
| Tear Resistence | EN ISO 3377-1 / >20 N |
| Crack Resistence | EN ISO 5402 / 50000 CYCLES NO DAMAGE |
| Thickness | 1,2 / 1,4 mm |
|---|---|
| Origin | European Raw Hides |
| Dry Rub Fastness | EN ISO 11640 / 1000 CYCLES VAL.5 GREY SCALE |
| Wet Rub Fastness | EN ISO 11640 / 250 CYCLES VAL.5 GREY SCALE |
| Light Fastness | EN ISO 105-B02 / >6 BLUE SCALE |
| Adhesion of Finishing | EN ISO 11644 / >2 N / 10 mm |
| Tear Resistence | EN ISO 3377-1 / >20 N |
| Crack Resistence | EN ISO 5402 / 20000 CYCLES NO DAMAGE |
Bronce
Cobre